Showing 1–15 of 349 results

BCM Pistol Grip Mod 1 Black Fits AR-15

$27.99
BCM Pistol Grip Mod 1 Black Fits AR-15
  • Pistol Grip
  • Mod 1
  • Black
  • Reduced Angle For Improved Ergonomics
  • Hinged Trap Door Offering Storage Inside The Grip With A Water Resistant Rubber Gasket
  • Each Grip Includes Both An Extended Modular Insert To Close The Gap Between The Trigger Guard And Pistol Grip, And A Smooth Modular Insert For Use With Some Rifles With Larger Built In Trigger Guards. (User Can Decide Which One To Install)
  • Made In The USA And Manufactured From High Quality Impact Resistant Polymers.
  • Test Fit To Ensure Proper Function (May Display Attributes Consistent With This QC Process)

BCM Rail Alpha 10″ Keymod Black Fits AR-15

$179.99
BCM Rail Alpha 10″ Keymod Black Fits AR-15
  • KMR Alpha
  • 10″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 6.2 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 10.5″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 8.6 Oz. On A 10″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Rail Alpha 13″ Keymod Black Fits AR-15

$189.99
BCM Rail Alpha 13″ Keymod Black Fits AR-15
  • KMR Alpha
  • 13″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 7.8 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 13.4″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 10.2 Oz. On A Very Long 13″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Rail Alpha 15″ Keymod Black Fits AR-15

$199.99
BCM Rail Alpha 15″ Keymod Black Fits AR-15
  • KMR Alpha
  • 15″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 8.6 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 15.0″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 11 Oz. On A Very Long 15″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Rail Alpha 7″ Keymod Black Fits AR-15

$169.99
BCM Rail Alpha 7″ Keymod Black Fits AR-15
  • KMR Alpha
  • 7″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 4.5 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 7.39″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 6.9 Oz. On A 7″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Rail Alpha 8″ Keymod Black Fits AR-15

$169.99
BCM Rail Alpha 8″ Keymod Black Fits AR-15
  • KMR Alpha
  • 8″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 4.9 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 8.39″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 7.3 Oz. On A 7″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Rail Alpha 9″ Keymod Black Fits AR-15

$174.99
BCM Rail Alpha 9″ Keymod Black Fits AR-15
  • KMR Alpha
  • 9″
  • Black
  • Keymod Free Float Handguard
  • 100% Aluminum
  • Lightweight And Durable. Also Featuring A Proprietary Patent Pending Mounting, Indexing And Lock Up System That Mitigates 12:00 Rail Movement Under Heat Generated From The Barrel Nut.
  • Handguard Alone Weighs 5.6 Oz
  • 1.3″ Inner Diameter
  • 1.5″ Outside Flat To Flat
  • Handguard Flares Forward (Towards Muzzle End) At The 3 And 9 O'Clock Positions Approximately 1/4″
  • Actual Length When Measured To Flare Is 9.4″
  • The KMR Barrel Nut Will Fit Over All Mil-Spec Diameter Barrels (Max Of 1″)
  • Mounting Hardware, 2.4 Oz., For A Total Of 8.0 Oz. On A 9″ Rail
  • The KMR Alpha Is Hardcoat Anodized For Corrosion Resistance As Well As To Maintain A Non-Reflective Finish.
  • Includes BCM Keymod Sling Mount

BCM Vertical Grip Black Fits Picatinny Rails

$45.99
BCM Vertical Grip Black Fits Picatinny Rails
  • Gunfighter Vertical Grip
  • Picatinny
  • Black
  • Mounted In Forward Angle Increases Rigidity Of Forearm, While Providing More Natural Wrist Angle When Grabbing The Vertical Grip.
  • Mounted In Reverse Angle To Increase Control When Grabbing Handguard And Vertical Grip.
  • Flat Sides Give Better Yaw Control During Firing And Non-Firing Manipulations
  • Aggressive Texture And Generous Storage Volume Combined With Modular Design To Allow Improvements And Adaptation In The Future.
  • Cross Bolt Designed To Work With Improvised Tools (Such As A Quarter) Allow For Easy Adjustment Or Re-Tightening
  • Hinged Trap Door Offering Storage Inside The Grip With A Water Resistant Rubber Gasket
  • Reversible Clamps Allow User To Setup Fasteners To Reside On Either Side
  • Spring-Loaded Clamp Makes Installation And Removal Easier
  • Made In The USA

BCM Vertical Grip FDE Fits Picatinny Rails

$45.99
BCM Vertical Grip FDE Fits Picatinny Rails
  • Gunfighter Vertical Grip
  • Picatinny
  • Flat Dark Earth
  • Mounted In Forward Angle Increases Rigidity Of Forearm, While Providing More Natural Wrist Angle When Grabbing The Vertical Grip.
  • Mounted In Reverse Angle To Increase Control When Grabbing Handguard And Vertical Grip.
  • Flat Sides Give Better Yaw Control During Firing And Non-Firing Manipulations
  • Aggressive Texture And Generous Storage Volume Combined With Modular Design To Allow Improvements And Adaptation In The Future.
  • Cross Bolt Designed To Work With Improvised Tools (Such As A Quarter) Allow For Easy Adjustment Or Re-Tightening
  • Hinged Trap Door Offering Storage Inside The Grip With A Water Resistant Rubber Gasket
  • Reversible Clamps Allow User To Setup Fasteners To Reside On Either Side
  • Spring-Loaded Clamp Makes Installation And Removal Easier
  • Made In The USA

BCM Vertical Grip Short Black Fits Keymod Rails

$44.99
BCM Vertical Grip Short Black Fits Keymod Rails
  • Gunfighter Vertical Grip Short
  • Quick Detachable Keymod Version
  • Black
  • Quick Detachable, Tool-Less, Direct Mount Keymod Interface
  • Low-Profile Length For Increased Mobility And Decreased “Snag” Factor.
  • The Forward Angle Increases The Rigidity Of The Forearm, While Providing A More Natural Wrist Angle.
  • Can Be Mounted In Reverse Angle To Increase Control When Grabbing Handguard And Grip
  • Flat Sides Give Better Yaw Control During Firing And Non-Firing Manipulations
  • Aggressive Texture
  • Storage Inside The Grip
  • Requires 3 Keymod Attachment Hole Mounting Points
  • Spring-Loaded Clamps Makes Installation And Removal Easier
  • Made In The USA

BCM Vertical Grip Short Black Fits Picatinny Rails

$39.99
BCM Vertical Grip Short Black Fits Picatinny Rails
  • Gunfighter Vertical Grip Short
  • Fits Picatinny Rails
  • Black
  • Low-Profile Length For Increased Mobility And Decreased “Snag” Factor.
  • The Forward Angle Increases The Rigidity Of The Forearm, While Providing A More Natural Wrist Angle.
  • Aggressive Texture And Storage Volume Combined With Modular Design Allows For Improvements And Adaptation In The Future.
  • Included Is A Cross Bolt Designed To Work With Improvised Tools To Allow For Easy Adjustment Or Re-Tightening, Reversible Clamps Which Allows Users To Set Up Fasteners To Reside On Either Side
  • Spring-Loaded Clamps Makes Installation And Removal Easier
  • Flat Sides Give Better Yaw Control To The Shooter During Firing And Non-Firing Manipulations
  • Can Be Mounted In Reverse Angle To Increase Control When Grabbing Handguard And Grip
  • Made In The USA

BCM Vertical Grip Short FDE Fits Keymod Rails

$44.99
BCM Vertical Grip Short FDE Fits Keymod Rails
  • Gunfighter Vertical Grip Short
  • Keymod
  • Flat Dark Earth
  • Quick Detachable, Tool-Less, Direct Mount Keymod Interface
  • Low-Profile Length For Increased Mobility And Decreased “Snag” Factor.
  • The Forward Angle Increases The Rigidity Of The Forearm, While Providing A More Natural Wrist Angle.
  • Can Be Mounted In Reverse Angle To Increase Control When Grabbing Handguard And Grip
  • Flat Sides Give Better Yaw Control During Firing And Non-Firing Manipulations
  • Aggressive Texture
  • Storage Inside The Grip
  • Requires 3 Keymod Attachment Hole Mounting Points
  • Spring-Loaded Clamps Makes Installation And Removal Easier
  • Made In The USA

BCM Vertical Grip Short FDE Fits Picatinny Rails

$39.99
BCM Vertical Grip Short FDE Fits Picatinny Rails
  • Gunfighter Vertical Grip Short
  • Fits Picatinny Rails
  • Flat Dark Earth
  • Low-Profile Length For Increased Mobility And Decreased “Snag” Factor.
  • The Forward Angle Increases The Rigidity Of The Forearm, While Providing A More Natural Wrist Angle.
  • Aggressive Texture And Storage Volume Combined With Modular Design Allows For Improvements And Adaptation In The Future.
  • Included Is A Cross Bolt Designed To Work With Improvised Tools To Allow For Easy Adjustment Or Re-Tightening, Reversible Clamps Which Allows Users To Set Up Fasteners To Reside On Either Side
  • Spring-Loaded Clamps Makes Installation And Removal Easier